32
CC539
Maintenance Schedules
SCHEDULED MAINTENANCE THAT CAN BE PERFORMED
BY OWNER/OPERATOR
NOTE: Only perform maintenance which applies to your particular power package.
Task Interval
Seawater Strainer - Check and clean.
Before Use and Whenever Insufficient Seawater
Flow is Suspected (if operating temperature
Water Pickups - Check for Marine growth or debris.
exceeds normal range.)
Engine Crankcase Oil - Check level.
Transmission Fluid - Check level.
Closed Cooling System Coolant (If so equipped) -
Check level.
Weekly
Battery - Check level and inspect for damage.
Drive Belt Inspect condition and check tensions.
Every 100 hours of Use or 120 Days Whichever
occurs first. Once a Year.
Power Package Exterior Surfaces - spray with
Quicksilver Corrosion Guard.
Saltwater Use: Every 50 hours of operation or 60
days, Whichever Occurs First.
Freshwater Use: Every 100 hours of operation or
120 days, Whichever Occurs First.
Power Package Exterior Surfaces - Clean and Paint Once a Year
Cooling System - Flush seawater section. Saltwater Use: After Each Use
To Next Page
Loading...
Need help?
General