To Next PageTo Next Page
Need help?Do you have a question about the Mercury Racing Sterndrive 600SCi and is the answer not in the manual?
General| Engine Type | V8 |
|---|---|
| Engine Model | 600SCi |
| Horsepower | 600 hp |
| Fuel Type | Gasoline |
| Aspiration | Supercharged |
| Gear Ratio | 1.50:1 |
| Cylinders | 8 |
| Displacement | 8.2L |
| Fuel System | Electronic Fuel Injection |
| Alternator Output | 70 A |
| Fuel Octane | 91 |
Details on how to register the warranty for products sold in the US and Canada.
Explains how the limited warranty can be transferred to a subsequent purchaser.
Explains what is covered under the one-year limited warranty for Mercury Racing products.
Outlines prerequisites for obtaining warranty coverage, including dealer registration and maintenance.
Describes Mercury Marine's obligations, limited to repair, replacement, or refund.
Details the process for obtaining warranty service, including dealer access and proof of ownership.
Lists items and conditions explicitly excluded from the limited warranty coverage.
Provides contact information for government agencies seeking warranty packet information.
Details the three-year limited warranty specifically covering corrosion damage.
Outlines disclaimers on implied warranties and limitations on damages.
Defines the operator's duties for safe boat and occupant operation.
Warns about the dangers of overpowering a boat and exceeding capacity limits.
Recommends orientation rides and familiarization for unfamiliar high-speed boats.
Explains the function and purpose of the lanyard stop switch for safety.
Provides guidance on trailering the boat with the drive unit in up or down position.
Advises caution when boating in areas with people in the water.
Alerts users to the dangers of carbon monoxide poisoning from engine exhaust.
Warns about hazards associated with jumping waves or wakes.
Advises caution and reduced speed in shallow water or areas with obstacles.
Provides recommendations for safe operation and adherence to regulations.
Instructs owners on reporting a stolen power package to authorities and Mercury Marine.
Details on how to identify the engine model, displacement, and serial numbers.
Provides key technical data like horsepower, displacement, bore, stroke, and weight.
Specifies RPM limits, pressure ranges, and temperature thresholds for engine operation.
Specifies the recommended unleaded gasoline type and octane rating for the engine.
Lists recommended engine crankcase and supercharger gearcase oils and important practices.
Lists fluid capacities for crankcase oil, gearcase, cooling system, and drive unit.
Notes that the engine is rated above 500 HP and exempt from California emissions regulations.
Provides instructions and cautions for the engine break-in procedure.
Explains how to monitor critical engine and boat functions using the information system.
Describes the audible and visual warning system for engine alerts and faults.
Details the engine guardian system for monitoring and protecting the engine.
Explains the operation of console-mounted remote controls for throttle and shifting.
Describes how to adjust the drive unit angle for optimal boat performance and handling.
Explains how positioning weight inside the boat affects performance and handling.
Ensures the boat bottom is clean, flat, and smooth for maximum speed.
Defines cavitation and lists common causes like weeds or damaged propellers.
Guides on choosing the correct propeller for optimal engine RPM and performance.
Identifies environmental factors like elevation and temperature that reduce engine power.
Lists specific tools required for various maintenance procedures.
Highlights the importance of frequent maintenance for high-performance engines.
Emphasizes using genuine or compliant parts for electrical, ignition, and fuel systems.
Provides schedules for engine maintenance tasks based on hours or time intervals.
Instructions for checking engine oil, supercharger oil, and power steering fluid levels.
Details lubrication points for shift cables and drive shaft components.
Procedure for preparing the engine for storage, including oil and filter changes.
Steps to completely drain the cooling system to prevent freezing damage.
Steps to take to prepare the engine after storage, including checks and fluid supply.
Lists possible causes and remedies for the engine failing to crank.
Provides solutions for common issues when the engine cranks but won't start.
Addresses issues causing difficult starting, rough running, or backfiring.
Diagnoses causes and offers solutions for engine overheating problems.
Addresses issues related to insufficient or low engine oil pressure.
Troubleshoots low seawater pressure by checking supply and component condition.
Recommends returning the unit to an authorized dealer for factory-trained service.
Directs inquiries for genuine parts and accessories to the authorized dealer.
Provides contact information for Mercury Mercruiser service offices worldwide.
Information on how to obtain additional literature for US and Canadian customers.
Information on obtaining literature for customers outside the US and Canada.
