EasyManua.ls Logo

Mercury Racing Sterndrive 600SCi - Changing Fluids

Mercury Racing Sterndrive 600SCi
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
76
3. If the oil level is below the "MIN" mark, remove the fill cap and
add Power Trim and Steering Fluid to bring the oil level up to
the "MAX" mark on the reservoir.
10160
a
b
a - Vented trim pump fill cap
b - Trim pump filter and vents (4)
Tube Ref No. Description Where Used Part No.
114
Power Trim and
Steering Fluid
Power trim pump
reservoir
92-858074K0
1
4. Inspect the fill cap vent slots to ensure that they are clean.
Re‑install the fill cap.
Changing Fluids
See the Maintenance Chart for lubricant change frequency.
Lubricant should be changed before placing the boat in storage.
Power trim or power steering fluids do not require changing.
CRANKCASE OIL AND FILTER (BOAT IN THE WATER)
!
CAUTION
ENVIRONMENTAL HAZARD! Discharge of oil or oil waste into
the environment is restricted by law. Do not spill oil or oil waste
into the environment when using or servicing your boat. Contain
and dispose of oil or oil waste as directed by local authorities.

Table of Contents

Related product manuals