MAINTENANCE
89
13.Grease the propeller shaft with anti‑corrosion grease.
Re‑install the propeller and torque the prop nut to
specification.
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft 92-802867A1
Description Nm lb. in. lb. ft.
Propeller nut 75 55
IMPORTANT: Oil level in the gear lube monitor will rise and fall
during drive operation. Always check the oil level when the drive
is cool and the engine is shut down.
Lubrication
SHIFT CABLE
Lubricate the pivot points with 4 Cycle 25W40 motor oil.