EasyManua.ls Logo

Mercury Racing Sterndrive 600SCi - Checking Fluid Levels

Mercury Racing Sterndrive 600SCi
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
69
Interval Task
Every 100 hours of operation or once
a year, whichever occurs first.
Supercharger ‑ Change oil.
Power package exterior surfaces ‑ Clean
and paint.
Check engine cylinder compression.
Oil coolers for the engine and power
steering ‑ Clean seawater section.
Replace positive crankcase ventilation
(PCV) valve.
Flame arrestor and crankcase ventilation
hose ‑ Inspect, clean or replace.
Engine alignment ‑ Check.
Exhaust ‑ Check for signs of water
leakage.
Exhaust system internal and external
shutters ‑ Inspect.
Engine output shaft, bearing, and pilot
bushing ‑ Inspect and lubricate.
Rear bearing support block ‑ Check
alignment.
MerCathode system ‑ Test output.
Steering head and remote control ‑
Inspect and lubricate.
Drive unit bellows and clamps ‑ Inspect.
Propeller shaft bearing ‑ Inspect by
measuring shaft deflection.
Drive bearing carrier ‑ Check bore for
evidence of friction with the propeller
shaft.
Checking Fluid Levels
CRANKCASE OIL
IMPORTANT: Check the engine crankcase oil at the intervals
specified in the Maintenance Chart.

Table of Contents

Related product manuals