MAINTENANCE
102
2. If the fuel hoses need to be removed from the cooler, have this
service done by an authorized Mercury Marine dealer.
a - Hose clamps to the fuel cooler
3. Re‑install the cooler and tighten the hose clamps securely.
4. Start the engine and inspect the cooling system for leaks.
Serpentine and Supercharger Drive Belts
SERPENTINE DRIVE BELT ROUTING AND TENSION
!
WARNING
Avoid possible serious injury. Make sure that the engine is turned
off and the ignition key is removed before inspecting belts.
IMPORTANT: The drive belt must be routed as shown or damage
may result.
To Next Page
Loading...
