MAINTENANCE
101
IMPORTANT: If the oil hoses need to be removed from the cooler,
be prepared to cap or plug them to avoid draining the power
steering reservoir.
a - Hose clamps (2)
2. Re‑install the cooler and tighten the hose clamps securely.
3. Check the power steering fluid level.
4. Start the engine and inspect the cooling system for leaks.
FUEL COOLER
NOTE: The fuel cooler is located on the lower starboard side of the
engine.
1. Loosen the water hose clamps and remove the water hoses
to inspect or clean the cooler.
To Next Page
Loading...
