Mercury SmartCraft Systems Monitor User Manual

24
CAL 2 CALIBRATION
Tank 1 Calibration
Once the capacities have been
entered, you need to select
whether you want to calibrate
fuel tank 1 ” ’t1”.
NOTE: The gauge will not let you
calibrate the fuel tank until the ca-
pacity had been entered).
1. Press the
button to select 1= on, 0 = off. Selecting “1” and
then press
to continue fuel tank calibration.
Gal
Tank 1 Calibration 0%
Setting
Have the fuel tank level at
empty.
2. Press the
button to save. Press the button to ad-
vance to 25% setting.
25 Percent Fuel to Add
Gal
Tank 1 Calibration 25%
Setting
Adding the amount of fuel shown
will raise fuel tank level to 25 per-
cent.
NOTE:The quantity of “Fuel to
Add” is determined by the fuel
tank capacity number entered.
3. Add the displayed amount of fuel to the fuel tank.
4. Press the
button to save. Press the button to ad-
vance to 50% setting.

Mercury SmartCraft Systems Monitor Specifications

General

Brand	Mercury
Model	SmartCraft Systems Monitor
Category	Monitor
Language	English