EasyManua.ls Logo

Mercury V-6 series

Mercury V-6 series
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
75
CA77
Propeller
WARNING
Avoid Injury: Remote Control must be in NEUTRAL and igni-
tion key removed from switch before removing and/or install-
ing propeller.
WARNING
Avoid Injury: Place a block of wood between anti-ventilation
plate and propeller to protect hands from propeller blades and
to prevent propeller from rotating when removing propeller
nut.
CAUTION
Avoid Injury: Periodically check propeller nut for tightness
during boating season. A minimum of 55 lbs. ft. (75 N
m)
torque is required.
CA746
REMOVAL
1 Place wood block between propeller blade and anti-ventilation
plate to prevent rotation. Straighten bent tabs on tab washer.
2 Turn propeller shaft nut counterclockwise to remove nut.
3 Slide tab washer, spline washer, propeller and thrust hub off
propeller shaft.
CA79
REPAIR
Some damaged propellers can be repaired. See your dealer.

Table of Contents

Related product manuals