Using the CD player
11
Stopping, pausing, and repeating play
You can pause a disc while keeping it spinning, so that you can
resume play instantly.
You can also set a disc to play repeatedly, so that when the disc
(or selection) has played, it will begin again from the beginning.
This function is only available from the remote.
To stop play
● Press • (Stop).
The display will show the total number of tracks on
the disc.
For example:
--2O
To pause play
● Press = (Pause).
The Paused indicator will appear, and the disc will remain
spinning.
To continue after pausing
● Press = (Pause) or > (Play).
To continuously repeat a disc
● Press Repeat (remote only).
The Repeat indicator will appear.
To cancel the repeat function
● Press Repeat again.
To Next Page
