Configuring the surround controller
39
To specify the type of subwoofer
● Press > or < until you see a
display such as:
Sub Wide
● Press A or V to step between the alternative options, as
shown in the following table:
Option Description
Narrow The surround controller provides a
120Hz cut off; the subwoofer crossover
should be bypassed.
Wide The surround controller provides a
wide-band signal for a subwoofer that
includes a crossover.
Off No subwoofer present. The main
channels are full bandwidth.
When you have chosen the subwoofer option you want to use
proceed to the next step.
To specify the surround speakers
● Press > or < until you see a
display such as:
Surrounds? Y
● Press A or V to change the option between Y and N, to
specify whether there are surround speakers in your system.
To exit from configuration
● Press the Off key.
To Next Page
