Using DSP5000 24
DSP5000 User Guide
Recalling settings
The settings stored in the DSP5000 can be recalled at any time. When
the display is normal (i.e. not a tone cursor):
1. Press Store
The DSP5000 will respond with
rEc.
Tip You can now compare the stored settings with the standard ones.
Use the Clear key to restore a flat response, then Store to recall the
stored settings.
Note When you change sources, you will need to press Store to recall
any favourite tone setting you may have stored.
Note Clear does not reset the phase and axis settings.
To Next Page
Loading...
Need help?
General
