Need help?Do you have a question about the Meridian DSP6000 and is the answer not in the manual?
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Digital Inputs | AES/EBU, S/PDIF |
| Digital Outputs | AES/EBU |
| DSP Resolution | 24-bit |
| Type | Active |
| Drivers | 1 x 6" midrange, 1 x 1" tweeter |
| Dimensions (H x W x D) | 300 mm x 400 mm |
Details the core features and technology of Meridian DSP loudspeakers, including Digital Signal Processing and drive units.
Technical specifications for DSP5000 and DSP5000C models, covering inputs, processing, output stages, and acoustics.
Technical specifications for DSP5500, DSP5500HC, and DSP5500C models, detailing digital I/O, signal processing, and drivers.
Technical specifications for DSP6000 and DSP6000C models, including digital inputs, signal processing, output stages, and acoustics.
Lists optional accessories for Meridian DSP loudspeakers, such as additional leads and S-patch boxes.
Guide to unpacking DSP loudspeakers, listing included components and specific items for different models.
Instructions on fitting adjustable feet or rubber bumpons to DSP loudspeakers for stability and floor compatibility.
Procedure for assembling the head unit onto the base unit for DSP6000 and DSP6000C models.
Details digital and communications connections on the back panel of DSP loudspeakers for audio and system integration.
Guides on connecting DSP loudspeakers to Meridian systems, including multi-speaker setups and centre channel integration.
How to select audio sources for the DSP loudspeakers and switch them to standby mode.
Explains the front-panel display options and status indicator lights (Red, Yellow, Green) on the DSP loudspeakers.
Instructions for changing the volume level, including muting and restoring the sound on DSP loudspeakers.
How to modify the treble, bass frequencies, and absolute phase for optimal sound in your room.
Guides on using balance and axis controls to compensate for listening position and speaker height.
Details the five standard configuration Types for DSP loudspeakers and how to select them.
Instructions for setting speaker position (Left, Right, Centre) and designating master/slave roles.
Guides on configuring system address, product address, volume mode, and other system-wide parameters.
How to label, select digital inputs, and configure comms for each audio source on the master DSP loudspeaker.
How to adjust the frequency response for different speaker positions (Free, Boundary, Corner) and use center tilt offset.
Procedure for saving the configured settings on the DSP loudspeakers for normal operation.
Solutions for a blank front panel display and a non-functional remote control for DSP loudspeakers.
Addresses issues like the unit going silent due to heat, radio interference, and drive unit movement.
Resolves problems with configuration not taking effect, units staying in standby, or only the master speaker playing.
Guidance on cleaning the lacquer finish of DSP6000 and DSP6000C models to maintain their appearance.
Details on how to get service for DSP loudspeakers and information regarding the product guarantee.
To Next Page
