39
TROUBLESHOOTING
Drive units move when the speaker is switched on or
off
This is normal as the speaker active electronics settle.
Configuring the DSP loudspeaker does not have any
effect
Make sure that you are configuring the DSP loudspeaker used as the
master digital loudspeaker in the system. This determines the configuration
of all digital loudspeakers in the system.
Unit stays in standby
•
Check that it is connected correctly.
•
Turn the system on from another Meridian product in the system.
Only the master loudspeaker plays
•
Check the S5 cables are connected correctly.
Sound is odd or mono
•
Check that the DSP loudspeakers are correctly configured as Left and
Right respectively.
To Next Page
Loading...
