30
Operating Your Scooter
S542
Never operate your scooter without your feet being placed on
the scooter platform. Driving your scooter without your feet
on the platform could cause serious bodily injury.
!
!
Do not stand in front of the tiller while pulling the lever on
the top of the gas spring. The tiller might hit your body while
springing back.
Tiller Angle Adjustment:
The tiller angle adjustment lever allows you to position the tiller closer or further
away for better access to the controls.
Sit on the seat before adjust the tiller angle.
Hold top of the tiller with one hand and pull
down the lever with the other hand.
Adjust the angle of the tiller to a comfortable
position.
Release the lever, test the tiller is set in
position by attempting to push back and fore
to push backward and forward.
Getting in and out:
Your scooter is designed to make getting in and out of the scooter as easy as
possible. Make sure the scooter is on a level surface and the key switch is turned
OFF. If necessary, raise the armrest to give you maximum space to transfer in
or out of the seat. Once transfer is complete, return the armrest before operating
the scooter.
To Next Page
Loading...
