20
Adjusting the Seat Height
Remove the seat by rotating the seat by pushing
the seat swivel lever forward while pulling up on the
seat. Remove the nut and bolt securing the chrome
post into the chassis of the scooter. Reposition the
seat post to the required height and then secure by
reattaching the nut and bolt.
Adjusting the Armrest Width
Insert the armrest tubing into the seat so that the
armrest is positioned at the required width.
Tighten the threaded knob to securely hold the
armrest in place. Repeat for the other armrest.
Ensure that the armrests are equally positioned
on both sides of the seat.
Ensure the yellow line on the armrest is not visible outside the seat frame, when the
threaded knob is locked tight.
Tiller Lock
When the tiller is centered, pull the tiller lock out
and twist to secure the tiller for transportation.
Push the tiller lock up to release.
Always ensure the tiller lock is disengaged
when driving the scooter. Always check the
tiller moves and turns freely before driving.
To Next Page
