Safety Precautions
© 2010 Meru Networks, Inc. Installing AP1000 55
AP1000 Beta Test
Chapter 4
Installing AP1000
AP1000 is supported by System Director versions 4.1 and greater. This chapter describes how to install
and configure an AP1000. It contains the following sections:
z Safety Precautions
z Best Practices for a Mixed Network
z Unpack the AP1000
z Power Requirements
z Additional Equipment
z Installing AP1000
z Restoring AP1000 Settings
z Check AP1000 LEDs
z Where to Go From Here
Safety Precautions
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating
this product.
The AP1000 is only intended for installation in Environment A as defined in IEEE 802.3af. All intercon-
nected equipment must be contained within the same building, including the interconnected equip-
ment's associated LAN connection.
2
To Next Page
Loading...