Need help?Do you have a question about the Mesa/Boogie Lonestar and is the answer not in the manual?
General| Type | Tube |
|---|---|
| Channels | 2 |
| Reverb | Yes |
| Effects Loop | Yes |
| EQ | Treble, Mid, Bass |
| Tubes | 5 x 12AX7 |
| Controls | Gain, Treble, Mid, Bass, Presence, Master |
| Speaker Configuration | 1x12 |
| Reverb Type | Spring |
Pre-drive control for Channel 2's high gain preamp, affects saturation.
Adjusts predominant gain stage, shapes overall sound style and character.
Determines overall output volume and provides footswitchable boost.
Activates Channel 2's DRIVE circuitry for multi-stage high gain.
3-position switch selects Treble frequency enhancement for tonal shaping.
Selects output wattage and class of operation for each channel.
AC main fuse providing protection from fluctuations and power tube failure.
Selects between Silicon Diodes and Tube Rectifier for power supply.
On-board patch point for outboard processing between preamp and power section.
Allows proper biasing when swapping to EL34 power tubes for brighter response.
To Next Page