Mesa/Boogie MARK VII User Manual

PAGE 40
MIDI CONTINUOUS CONTROLLER ASSIGNMENTS
USER PRESETS DUMP/LOAD
DUMP SEND USER PRESETS
A User Presets Dump will send a MIDI SysEx file with the amplifier’s presets and any other settings out through
the MIDI THRU/OUT jack. The User Presets Dump includes CRC (Cyclic Redundancy Check) bytes for MIDI
error detection.
To perform a User Presets Dump from one amplifier to another, making an exact clone, connect the MIDI
THRU/OUT jack of the original to the MIDI INPUT jack of the clone. Remember to set the MIDI Channel of the
clone so it matches that of the original (unless you don’t actually want them to respond to MIDI messages on
the same MIDI Channel).
The User Presets Dump can also be saved to a computer as a backup or to load the presets into another am-
plifier at some other time. In addition to the computer, you will also need a MIDI/USB Interface and a MIDI app/
utility capable of sending and receiving MIDI SysEx messages or files. Two free apps that we recommend are
SysEx Librarian by www.snoize.com (Mac OS X) and MIDI-OX by www.MIDIox.com (Microsoft Windows).
A USER PRESETS DUMP CAN BE PERFORMED AFTER:
• The amplifier is first powered up and prior to receiving any MIDI messages.
• The amplifier has received a User Presets Load, whether successful or not.
MARK 7
FUNCTION
MIDI CC
NUMBER
MIDI CC
VALUES
COMMENTS
Ch.1 & IR 20 0  7 Selects Channel 1 and CabClone IR Preset 1 - 8
Ch.2 & IR 21 0  7 Selects Channel 2 and CabClone IR Preset 1 - 8
Ch.3 & IR 22 0  7 Selects Channel 3 and CabClone IR Preset 1 - 8
Channel 1 23 64  127 Selects Channel 1 and CabClone IR per Ch1 IR Sw.
Channel 2 24 64  127 Selects Channel 2 and CabClone IR per Ch2 IR Sw.
Channel 3 25 64  127 Selects Channel 3 and CabClone IR per Ch3 IR Sw.
FX Loop 26
0  63 OFF
64  127 ON
Turns the FX Loop on and o
Reverb 27
0  63 OFF
64  127 ON
Turns the Reverb on and o
Graphic EQ 28
0  63 OFF
64  127 ON
Turns the Graphic EQ on and o
NOTE: MIDI CC Numbers #20 - #25 are mutually exclusive; the most recently received takes priority.

Mesa/Boogie MARK VII Specifications

General

Channels	3
Preamp Tubes	5 x 12AX7
Power Tubes	4 x 6L6
MIDI	Yes
EQ	5-Band Graphic EQ
Reverb	Yes
Footswitch	Included
Effects Loop	Yes
Wattage	90/45/25 (Assignable per Channel)