Need help?Do you have a question about the Meta System C12 and is the answer not in the manual?
Guidance on correct system usage and important notes for users.
Details on remote control, emergency key, and code card provided by the installer.
Instructions for applying adhesive labels on doors/windows as a deterrent.
How the system responds to detected break-ins, including siren and dialler functions.
Explanation of LED signals indicating the system's disarmed status and power supply.
Description of the flashing red LED indicating the system is armed.
Procedure for activating the alarm system using the remote control.
Procedure for deactivating the alarm system using the remote control.
How to arm the system partially, inhibiting certain sensors.
Method to trigger an immediate alarm cycle using the remote control.
Explanation of red, green, and yellow LED signals on the central unit.
Details on C21 sensor red light, low battery signal, and immunity.
Recommendations for battery replacement and general checks for specific sensors.
Description of the red warning LED on the C319 module for system status.
How the central unit records and identifies triggered alarms and their sources.
Step-by-step procedure to memorize new remote controls for system operation.
Instructions to block lost or stolen remote controls for enhanced system security.
Important advice regarding initial battery charging for backup components.
General| Category | Security System |
|---|---|
| Type | Car Alarm |
| Frequency | 433.92 MHz |
| Anti-hijack | Yes |
| Voltage | 12V |
| Sensors | Shock sensor, Door sensor |
| Immobilizer | Yes |
To Next Page
