Need help?Do you have a question about the Metabo WEPBA 14-125 QuickProtect and is the answer not in the manual?
General| Power Input | 1400 W |
|---|---|
| Disc Diameter | 125 mm |
| No-load Speed | 11000 rpm |
| Weight | 2.5 kg |
| Spindle Thread | M14 |
| Speed at Rated Load | 8500 rpm |
| Cable Length | 4 m |
Defines the intended application of the power tool for grinding, sanding, separating, and wire brushing.
Provides essential safety guidelines for operating power tools, covering work area, electrical, personal safety, and tool care.
General safety warnings applicable to various operations like grinding, sanding, and cutting-off.
Explains kickback phenomenon and provides specific precautions to avoid it during operation.
Safety guidelines tailored for grinding and abrasive cutting-off tasks, including guard usage and wheel selection.
Further safety advice for abrasive cutting-off, focusing on preventing wheel binding and excessive depth of cut.
Precautions for sanding operations, including correct accessory size and proper workpiece handling.
Safety guidelines for wire brushing, emphasizing awareness of flying bristles and guard interference.
Miscellaneous safety instructions, including protective equipment and handling of the machine.
Details the function and location of the spindle locking button.
Instructions for securely attaching the auxiliary handle for better control.
Guidance on how to properly install the safety guard for different wheel types.
Steps for securely attaching grinding wheels using the Quick clamping nut.
Procedure for locking the spindle to facilitate accessory changes.
Instructions on correctly positioning the grinding wheel on the spindle.
Step-by-step guide for securing and releasing the Quick clamping nut.
Instructions on how to safely operate the power tool.
Techniques for effective grinding and sanding, including movement and angle.
Guidance on safe cutting-off operations, emphasizing disc direction and control.
Instructions for using the tool for wire brushing applications.
Procedure for cleaning the motor using compressed air to maintain performance.
Troubleshooting for electronic signal display and coil temperature issues.
Details on the safety guard designed for cut-off wheels and diamond cut-off wheels.
Description of a guard for cutting stone slabs with dust extraction.
Information on the hand guard for sanding pads and wire brushes.
Guidance on qualified repair procedures and contacting Metabo service centers.
Information on proper disposal of sanding dust and recycling of the machine.
Details on technical specifications, including accessory diameter and clamping shank thickness.
To Next Page