Need help?Do you have a question about the Metapace T-3II and is the answer not in the manual?
Instructions to prevent serious injury or death, covering multi-outlets, adapters, cables, and handling.
Precautions for safe operation including handling smoke/odor, stability, accessories, water ingress, and out-of-order use.
Guidance on static electricity protection, Waste Electrical and Electric Equipment disposal, and label material details.
Highlights include max speed, low noise, interface support (USB, Serial, Ethernet, Wi-Fi), data buffer, and cash drawer control.
Covers unpacking the printer, checking included items, and initial setup procedures.
Details on connecting various interfaces (Serial, Parallel, USB, Ethernet, Wi-Fi) and the cash drawer connector.
Explains DIP switch settings for interface configuration, print density, and near-end sensor adjustments.
Covers paper loading, jam clearing, printer usage, computer connection, and power supply connection procedures.
Step-by-step guide on how to perform a self-test to check printer functionality and status.
Instructions for enabling hexadecimal dump mode to analyze printer data and commands for troubleshooting.
Provides detailed specifications including printing method, speed, width, supply voltage, environmental conditions, and product life.
Guide on cleaning the printer's print head and rollers, and instructions for disabling the near-end sensor for wall mounting.
General| Type | Thermal Printer |
|---|---|
| Print Method | Direct Thermal |
| Print Resolution | 203 dpi |
| Print Width | 72 mm |
| Media Width | 80 mm |
| Interface | USB, Serial, Ethernet |
| Auto Cutter | Yes |
| Print Speed | 250 mm/sec |
To Next Page
