1
www.metcal.com
PS-900 Soldering System
Operations Manual & User Guide
Congratulations on your purchase of the PS-900 Soldering Station. It utilizes SmartHeat
®
technology to ensure unsurpassed performance without the need for system calibration. It
has been designed and manufactured to the highest quality standards to provide
consistent good performance and reliability.
This document has been prepared to guide you with the setup, operation, and user
maintenance of your station. We recommend that you review it to optimize performance
and operational consistency.
Table of Contents
1. Packing / Spares Lists ............................................ 1
2. Initial Setup............................................................. 2
3. Smartheat
®
............................................................. 2
4. Selecting Heater Tips ............................................. 3
5. Replacing Heater Tips ............................................ 3
6. Replacing the Coil Assembly .................................. 4
7. Troubleshooting ...................................................... 4
8. Specifications ......................................................... 5
9. Warranty ................................................................. 6
10. Safety Information ................................................ 7
1-a. PACKING LIST (with part numbers for re-ordering):
a. PS-900 Power Supply (Part Number: PS-PW900)
b. PS-900 - Black (Part Number: WS2-NS
c. Sponge (Part Number: AC-YS4)
d. PS-900 Soldering Handle / Coil Assembly (Part Number: PS-HC3)
e. Cartridge Removal Pad (Part Number: AC-CP2)
f. Power Cord
g. Instruction Manual
1-b. ADDITIONAL SPARE PART / CONSUMABLE ITEMS:
a. Coil assembly, PS-900 system (Part Number: PS-CA3)
b. Handpiece / power cord. (NO Coil Assembly) (Part Number: PS-H3)
c. PS-900 Auto-sleep Workstand - Green (Part Number: WS2G)
d. Heater Tips (See section 4)
e. Net Power Meter for PS-900 system (part Number: PS-PM900)
To Next Page
Loading...
