To Next PageTo Next Page
Need help?Do you have a question about the Meterman 33XR and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Display Counts | 4000 |
| Resistance Ranges | 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ |
| Frequency Ranges | 10Hz to 10MHz |
| Power Source | 9V battery |
| Safety | CAT III 600V |
| Type | Digital Multimeter |
| AC Voltage Ranges | 400mV, 4V, 40V, 400V, 600V |
| DC Voltage Ranges | 400mV, 4V, 40V, 400V, 600V |
| DC Voltage Accuracy | +/- 0.5% of reading + 2 digits |
| DC Current Ranges | 400µA, 4000µA, 40mA, 400mA, 10A |
| DC Current Accuracy | ±1.0% + 2 digits |
| AC Current Ranges | 400µA, 4000µA, 40mA, 400mA, 10A |
| AC Current Accuracy | ±(1.5% + 5 digits) |
| Continuity | Audible tone if resistance < 10Ω |
| Diode Test | Test current 1mA, open circuit voltage 2.8V |
| Capacitance Ranges | 40nF, 400nF, 4µF, 40µF |
| Capacitance Accuracy | ±3.0% + 5 digits |
| Frequency Accuracy | ±(0.1% + 2 digits) |
| Temperature Range | -20°C to 1000°C |
| Temperature Accuracy | ±(1.0% + 3°C) |
Steps for verifying operation, correcting overloads, and measuring DC/AC voltage.
How to use the MIN MAX function to track maximum and minimum readings.
Detailed steps for measuring DC and AC current, including circuit setup.
Procedures for measuring resistance and checking continuity.
Guide to testing diodes with the multimeter.
