What to do if my Metkon FORCIPOL machine does not start?
If your Metkon Grinder doesn't start, first ensure the main switch is turned ON. If it still doesn't start, check the fuses at the back and replace any that are blown.
Why is the cooling water not flowing in my Metkon Grinder?
If the cooling water isn't flowing in your Metkon Grinder, check if the water button is closed and turn it ON. Also, verify that the valve on the water tap is open, and if not, turn the valve ON.
General| Model | FORCIPOL Series |
|---|---|
| Motor Power | 0.75 kW |
| Category | Grinder |
| Number of Platen | 1 |
| Platen Diameter | 200 mm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Dimensions | Varies by model |
To Next Page
