Metra Electronics 95-3003G User Manual

METRA. The World’s best kits.
™
metraonline.com
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
REV. 2/15/2016 INST95-3003G
Installation instructions for part 95-3003G
CAUTION! All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
• ISO DDIN radio provision
• Painted and textured to match the factory dash
• A) ISO DDIN trim panel • B) Radio brackets
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1858 • 70-1859 (amplified models)
Antenna Adapter: • 40-GM10
• Panel removal tool • Phillips screwdriver
• Rotary or similar suitable cutting tool
TOOLS REQUIRED
GM Full-Size Trucks / SUV
’
s 1995-2002
95-3003G
A B
Dash Disassembly ..................................................2
Kit Preparation ........................................................ 3
Kit Assembly
– ISO DDIN radio provision ...................................... 3
Table of Contents
APPLICATIONS
See application list inside cover

Metra Electronics 95-3003G Specifications

General

Brand	Metra Electronics
Model	95-3003G
Color	Gray
Material	Plastic
DIN Compatibility	Single DIN
ISO Compatibility	No

Summary

Dash Disassembly

Procedure

Steps to remove the factory dash panel, including parking brake and steering wheel adjustments.

Kit Preparation

Trim Plate Marking and Cutting

Instructions for marking and cutting the ISO DDIN trim plate and removing dash rear support.

Kit Assembly

Radio Bracket Attachment

Attaching radio brackets to the new radio using supplied screws.

Wiring and Antenna Connections

Connecting factory wiring harness and antenna to the radio.

Final Installation

Sliding the radio into the dash and snapping the trim plate.

Important Information

Technical Support and Troubleshooting

Contacting tech support for installation difficulties and troubleshooting tips.

Installer Certification

Information on installer training and recommending MECP certified technicians.