EasyManua.ls Logo

Metra Electronics 95-8903S User Manual

Default Icon
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
APPLICATIONS
1-800-221-0932
metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 95-8903S
Subaru Legacy & Outback 2010-up
(Non-navigation radios only)
95-8903S
• DDIN radio provision
• Stacked ISO radio provision
• Painted silver
Panel Removal Tool Phillips Screwdriver • Socket Wrench • Small Flat Blade Screwdriver
A
B
A) DDIN Trim plate • B) DDIN Brackets
TOOLS REQUIRED
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• 70-8901 Subaru Harness 1990-Up
• 70-7552 Nissan Harness 2007-Up
Antenna Adapter:
• 40-SB10 Subaru Antenna Adapter 2005-Up
Question and Answer IconNeed help?

Do you have a question about the Metra Electronics 95-8903S and is the answer not in the manual?

Metra Electronics 95-8903S Specifications

General IconGeneral
BrandMetra Electronics
Model95-8903S
Product TypeCar Stereo System
ColorSilver
MaterialHigh-grade ABS plastic
InstallationISO DDIN Radio Provision
ISO DDIN Radio ProvisionYes
Designed and manufactured with precision tolerancesYes
Gapless fit between the dash and the kitYes
Painted to match factory colorYes
High-grade ABS plastic constructionYes
Factory style textureYes

Summary

Kit Features and Components

Kit Features Overview

Details on DDIN radio provision, stacked ISO radio provision, and painted silver finish.

Kit Components Identification

Identification of DDIN Trim plate (A) and DDIN Brackets (B) included in the kit.

Wiring and Tools

Wiring and Antenna Connections

Lists required wiring harnesses and antenna adapters for installation.

Required Tools for Installation

Specifies tools needed, including panel removal tool and screwdrivers.

Dash Disassembly Procedure

Disconnect Battery and Remove Trim Panel

Instructions to disconnect the battery and unclip the radio trim panel with vents.

Remove Factory Radio Screws

Guidance on removing the four Phillips screws securing the factory radio.

Head Unit Kit Assembly

Prepare Wiring Harness

Locate factory wiring harness, use Metra/AXXESS adapter, and test unit.

Attach Brackets to Trim Plate

Instructions for attaching the Double DIN brackets to the Double DIN trim plate.

Install Head Unit and Secure

Slide head unit into assembly and secure with provided screws.

Reassemble Dashboard

Instructions to reassemble the dashboard in the reverse order of disassembly.

Related product manuals