METRA. The World’s best kits.
™
metraonline.com
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
REV. 3/7/2016 INST95-6534B
Installation instructions for part 95-6534B
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
• ISO DDIN radio provision
• ISO DDIN radio provision with pocket
• Painted matte black
• A1) ISO DDIN trim panel • A2) ISO DDIN trim panel with pocket
• B) Trim panel retainers • C) Radio brackets
• D) Cut template • E) (4) #8 x 3/8” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-6502-NAV • CHTO-01
Antenna Adapter: • 40-CR10
• Panel removal tool • Phillips screwdriver
• 7mm socket wrench • Cutting tool or hand saw
TOOLS REQUIRED
Dodge / Jeep 2007-2008
95-6534B
A1 A2 C D
E
Dash Disassembly ..................................................2
Kit Preparation ........................................................ 3
Kit Assembly
– ISO DDIN radio provision ...................................... 3
Table of Contents
APPLICATIONS
DODGE
Caliber 2007-2008
JEEP
Compass 2007-2008
Patriot 2007-2008
B
To Next Page
Need help?
General
