Metra Electronics 95-7318 User Manual

INSTALLATION INSTRUCTIONS FOR PART 95-7318
Phillips Screwdriver • Small Flat Blade Screwdriver • Panel Removal Tool
1-800-221-0932 www.metraonline.com
KIT FEATURES
© COPYRIGHT 2004-09 METRA ELECTRONICS CORPORATION
• DDIN Head Unit Provision
• ISO Stacked Head Unit Provision
A) DDIN Brackets B) DDIN Trim Plate
KIT COMPONENTS
TOOLS REQUIRED:
WIRING
AND ANTENNA CONNECTIONS (Sold Separately)
• 70-7301 - 1999-up Kia / Hyundai harness
95-7318
AB
APPLICATIONS
2005-2006 Kia Spectra 5
METRA. THE WORLD’S BEST KITS.™

Metra Electronics 95-7318 Specifications

General

Color	Black
Material	Plastic
Installation Type	Dash Kit
DIN Provision	Yes
Double DIN Provision	Yes
ISO Provision	No
Function	Allows installation of an aftermarket radio

Summary

Dash Disassembly

Disconnect Battery Terminal

Disconnect the negative battery terminal to prevent accidental short circuits.

Remove Dash Panel Assembly

Unclip and remove the entire panel surrounding the radio and A/C controls.

Extract Radio Mounting Screws

Remove the four Phillips screws securing the original radio to the dash.

Kit Assembly

Locate Factory Wiring Harness

Find the vehicle's factory wiring harness and connect the appropriate adapter.

Attach Double DIN Brackets

Secure the Double DIN brackets to the inside edge of the Double DIN trim plate.

Install Head Unit into Assembly

Slide the Double DIN or stacked ISO head unit into the bracket/housing assembly.

Reassemble Dash

Reassemble the vehicle's dash components in the reverse order of disassembly.