Metra Electronics 95-7330 - Kit Assembly and Radio Installation; Attach Brackets to Trim Plate; Mount Radio;Units

2
95-7330 KIT ASSEMBLY
B
A
DOUBLE DIN RADIO PROVISION
STACKED ISO MOUNT UNITS PROVISION
Slide the Double DIN radio or the
stacked ISO mount units into the
bracket/trim plate assembly and
secure the radio or ISO mount units
to the assembly using the screws
supplied with the radio or ISO mount
units.
(Figure B)
2
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Snap the Double DIN brackets to the
inside edge of the Double DIN trim
plate. (Figure A)
1