Metra Electronics 95-7510 User Manual

INSTALLATION INSTRUCTIONS FOR PART 95-7510
95-7510/
95-7510HG
APPLICATIONS
Mazda RX-8
2004-2008
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• TWO FINISHES
AVAILABLE:
99-7510=BLACK, 99-7510HG=GLOSS BLACK
• A) Radio / Climate Control Housing • B) Double DIN Radio Brackets • C) Rear Support
• D) Interface • E) Wiring Harnesses • F) (2) Climate Control Extension Harnesses
KIT COMPONENTS
A
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Set • Cutting Tool
1-800-221-0932
© COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORA
TION
www.metr
aonline.com
D
E
C
B
F

Metra Electronics 95-7510 Specifications

General

Brand	Metra Electronics
Model	95-7510
Category	Automobile Accessories
Language	English

Summary

Dash Disassembly

Initial Dash Removal Steps

Disconnect battery, remove shift knob, shifter trim, ashtray, and knee panel.

Radio and Climate Control Panel Removal

Remove radio/climate panel, display harness, radio chassis, and climate controls.

Hazard Switch Removal

Remove circuit board and hazard switch assembly.

Kit Assembly

Prepare Climate Controls and Mount Brackets

Prepare climate controls, secure hazard switch and climate control housing.

Attach Radio Unit and Rear Support

Attach DIN brackets and rear support to the radio unit.

Final Assembly and Wiring

Wiring Connections and EIA Code

Make wiring connections using the Metra/EIA color code.

Connect HVAC and Display Interfaces

Connect HVAC and display cables to the interface ports.

Connect Navigation and Final Reassembly

Connect navigation wires, battery, and reassemble dash.

Display Customization

Customize Ambient Temperature and Time

Set ambient temperature display and time format (12/24H).

Customize Display Text

Set custom text on the display by entering characters.

Notes