Metra Electronics 99-5822B User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-5822B
KIT FEATURES
• DIN Radio Provision With Pocket
• ISO Mount Radio Provision With Pocket
• Painted or Wood Grain
• A) Radio Housing • B) Radio Housing Brackets • C) Radio Housing Trim Panel
• D) ISO Brackets • E) ISO Trim Plate • F) (6) U Style Panel Clips
KIT COMPONENTS
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
A
• Cutting Tool • Phillips Screwdriver • Socket Wrench • Torx Driver
• Panel Removal Tool
B
C
F
TOOLS REQUIRED:
D
E
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
Har
ness:
• Please see www.metraonline.com for
specific interface harness
Antenna
Adapter:
• 40-CR10 - Chrysler antenna adapter 02-up
99-5822AS – PLATINUM / ASH SATIN
99-5822CM - KING RANCH / CURLY MAPLE
99-5822MM – LARIAT / MILANO MAPLE
99-5822B - BLACK
APPLICATIONS
2009-10 FORD F-150
LARIAT / KING RANCH / PLATINUM MODELS
(Not for NAV Equipped Models)

Metra Electronics 99-5822B Specifications

General

Brand	Metra Electronics
Model	99-5822B
Category	Car Stereo System
Language	English

Summary

Dash Disassembly

Disconnect Battery and Remove Panels

Steps to disconnect the battery, remove switch panels, and unclip trim panels.

Remove Hazard Switch and Climate Control

Instructions for removing hazard/airbag switches, cigarette lighter socket, and climate control.

Remove Factory Radio

Steps to remove the factory radio by unscrewing it from the trim panel.

Kit Assembly

Integrate Factory Components into Housing

Attaching hazard switch, cigarette lighter, and climate control to the new radio housing.

DIN Radio Provision with Pocket

Steps for installing a DIN radio with a pocket, including bracket and cage mounting.

ISO Mount Radio Provision with Pocket

Instructions for mounting an ISO radio using brackets and a trim plate.

Final Assembly and Wiring

Connect Wiring Harness

Using the EIA color code for making wiring connections with aftermarket adapters.

Reassemble Dash and Test Unit

Reassembling the dash components and connecting the battery for final testing.