Metra Electronics 99-8218 User Manual

METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
APPLICATIONS
1-800-221-0932
metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-8218
Panel Removal Tool • Phillips Screwdriver • Small Flat Blade Screwdriver • Socket Wrench
TOOLS REQUIRED
Toyota Camry/Camry Hybrid 2007-up
99-8218
• DIN radio provision with pocket
• ISO radio provision with pocket
• Double DIN radio provision
• Stacked ISO units provision
B
G
C
H
D
I
EA
F
• A) Radio Housing • B) Radio Housing Brackets • C) ISO Snap-In Brackets • D) Double DIN Brackets • E) Trim Plate
• F) Double DIN Trim Plate • G) Pocket • H) (4) # 8 x 3/8 Phillips Screws • I) (4) #4 x 1/4 Phillips Screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness: • 70-1761 Toyota harness 1987-up
• TYTO-01 Toyota amp interface 2003-up
Antenna Adapter: • Not Required

Metra Electronics 99-8218 Specifications

General

Brand	Metra Electronics
Model	99-8218
Category	Car Stereo System
Language	English

Summary

Kit Features, Components, and Tools

Kit Features Overview

Lists the key capabilities and provisions of the Metra 99-8218 installation kit.

Included Kit Components

Details all the physical parts included in the Metra 99-8218 radio installation kit.

Wiring and Antenna Connection Requirements

Specifies the necessary wiring harnesses and antenna adapters required for installation.

Required Tools for Installation

Lists the essential tools needed to perform the Metra 99-8218 installation process.

Dash Disassembly Procedures

Shift Knob and Trim Panel Removal

Instructions for safely removing the shift knob and surrounding trim panels.

Center Console and Pocket Removal

Steps for detaching the center console, cup holders, and storage pocket.

A/C Vent and Radio Assembly Extraction

Procedures for removing the A/C vents and the main radio/climate control assembly.

Separating Factory Radio from Climate Controls

Detailed steps on how to detach the original radio from the climate control unit.

Kit Assembly and Installation Options

Single DIN Radio Provision with Pocket

Steps for installing a single DIN radio with a storage pocket using the kit.

ISO Radio Provision with Pocket

Instructions for installing a single ISO radio with a storage pocket using the kit.

Double DIN Radio Provision

Guide for installing a double DIN sized radio using the provided kit components.

Stacked ISO Units Provision

Steps for installing two ISO radios mounted vertically using the kit.