4
99-8218
Dash Disassembly
7. Unclip and remove the A/C vents above
the radio. (Take care not to scratch the
dash panel). (Figure D)
8. Remove (2) 10mm bolts above the radio
(behind the A/C vents) and (2) 10mm
bolts below the climate controls (behind
pocket) then unplug and remove the
radio/climate control assembly.
(Figure E)
9. Remove the (10) Phillips screws
securing the brackets to the radio/
climate control assembly and separate
the radio from the climate controls.
(Retain climate controls and screws for
use during kit assembly). (Figure F)
10. Unscrew and remove the (2) Clips from
the back of the factory radio. (Retain
clips for use during kit assembly.
(Figure F)
Continue to kit assembly
1
2
3
4
5
6
1
2
3
4
5
6
(Figure D)
(Figure E)
(Figure F)
To Next Page
Loading...
