Metra Electronics 99-8903B User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-8903B
APPLICATIONS
SUBARU
LEGACY & OUTBACK
2010
(FOR NON-NAVIGATION RADIOS ONLY)
KIT FEATURES
• DIN radio provision with pocket
• ISO radio provision with pocket
• Painted scratch resistant matte black
A) Radio Housing B) ISO Brackets C) Trim plate
KIT COMPONENTS
A
TOOLS REQUIRED:
• Small Flat Blade Screwdriver • Phillips Screwdriver
• Panel Removal Tool • Socket Wrench
1-800-221-0932
© COPYRIGHT 2007-2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
99-8903B
B
C
METRA. THE WORLD’S BEST KITS.™
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• 70-8901 Subaru Harness 1990-Up
• 70-7552 Nissan Harness 2007-Up
Antenna Adapter:
• 40-SB10 Subaru Antenna Adapter 2005-Up

Metra Electronics 99-8903B Specifications

General

Manufacturer	Metra Electronics
Model	99-8903B
Category	Car Stereo System
Color	Black
Material	Plastic
ISO DDIN Radio Provision	Yes
Painted	Yes
Wiring Harness	Included
Antenna Adapter	Not included
Applications	Aftermarket radio installation
Compatibility	Compatible with select vehicles
Function	Dash kit for installing aftermarket radios

Summary

Dash Disassembly

Disconnect Battery and Remove Trim Panel

Disconnect the negative battery terminal and unclip the radio trim panel including the A/C vents.

Remove Factory Radio

Remove the four Phillips screws securing the factory radio from the dash.

Kit Assembly

DIN Head Unit Provision

Install the DIN cage into the radio housing and secure the aftermarket head unit into the cage.

ISO DIN Head Unit Provision

Mount ISO brackets to the head unit and slide it into the radio opening, then snap the trim plate.