Metra Electronics 99-7425 User Manual

4
99-7425 KIT ASSEMBLY
ISO MOUNT RADIO PROVISION WITH POCKET
Mount the ISO Brackets to the radio
with the screws supplied with the
radio.
(Figure A)
1
Slide the radio into the radio housing
until it snaps into place.
(Figure B)
2
Snap the trim plate onto the front of
the Radio Housing.
(Figure B)
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
A
B

Metra Electronics 99-7425 Specifications

General

Brand	Metra Electronics
Model	99-7425
Category	Automobile Accessories
Language	English