Metra Electronics 99-7509 User Manual

METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
APPLICATIONS
1-800-221-0932
metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-7509
Small Flat Blade Screwdriver • Panel Removal Tool • Phillips Screwdriver
TOOLS REQUIRED
Mazda 5 2006-up
(with manual climate controls)
99-7509
B
E
C
F
A
D
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• C) Double DIN Trim Plate • D) Snap In Pocket
KIT FEATURES
KIT COMPONENTS
• Painted to match factory dash
• DIN radio provision with pocket
• ISO radio provision with pocket
• Double DIN radio provision
• Stacked ISO mount units provision
WIRING & ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness: •70-7903 - Mazda Harness 01-up

Metra Electronics 99-7509 Specifications

General

Brand	Metra Electronics
Model	99-7509
Category	Automobile Accessories
Language	English

Summary

Dash Disassembly

Remove Shifter and Trim Panel

Remove the shifter and the two Phillips screws below the shift lever trim panel.

Remove Center Console Side Panels

Unclip and remove center console side trim panels, then remove screws behind them.

Remove Radio Trim Panel and Factory Radio

Unclip and pull center console, then remove radio trim panel and factory radio.

Kit Assembly

DIN Radio Provision with Pocket

Instructions for installing a single DIN radio with a pocket into the housing.

ISO Mount Radio Provision with Pocket

Instructions for installing an ISO mount radio with a pocket into the housing.

Double DIN/Stacked ISO Units Provision

Instructions for installing double DIN or stacked ISO units into the housing.