To Next PageTo Next Page
Need help?Do you have a question about the Metra Electronics 99-7519B and is the answer not in the manual?
Steps to carefully remove dashboard panels and climate controls from the vehicle.
Secure the four panel clips to the designated posts on the back of the radio housing.
Install a single DIN head unit with pocket into the provided housing and cage.
Mount an ISO DIN head unit using brackets and trim plate in the kit.
Install a double DIN unit by cutting a rib and using DDIN brackets.
Install stacked ISO DIN units using DDIN brackets and trim plate.
Make wiring connections using EIA code and reassemble the dash components.
Steps to carefully remove dashboard panels and climate controls from the vehicle.
Secure the four panel clips to the designated posts on the back of the radio housing.
Install a single DIN head unit with pocket into the provided housing and cage.
Mount an ISO DIN head unit using brackets and trim plate in the kit.
Install a double DIN unit by cutting a rib and using DDIN brackets.
Install stacked ISO DIN units using DDIN brackets and trim plate.
Make wiring connections using EIA code and reassemble the dash components.
General| Manufacturer | Metra Electronics |
|---|---|
| Part Number | 99-7519B |
| Product Type | Dash Kit |
| Color | Black |
| Material | Plastic |
| DIN Compatibility | Double DIN |
