Mount the ISO Brackets to the head
unit with the screws supplied with
the unit.
(Figure C)
3
C
D
Slide the pocket into the bottom
section of the kit housing.
(Figure B)
2
Slide the head unit into the radio
opening until the side clips engage.
(Figure D)
4
ISO DIN HEAD UNIT PROVISION
99-7519B
KIT ASSEMBLY
Turn over the 99-7519B housing,
take the climate control and screws
removed from the factory panel and
attach the climate control to the kit
housing using the factory screws.
(Figure A)
1
A
B
Snap the Trim plate into the Radio
Housing.
(Figure D )
5
6
To Next Page
Loading...
