Metra Electronics 99-7506 User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-7506
Cutting Tool • Phillips Screwdriver • Socket Wrench
1-800-221-0932 www.metraonline.com
KIT FEATURES
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
• DIN Head Unit Provision with pocket
• ISO DIN Head Unit Provision with pocket
• Double DIN Head Unit Provision
• Stacked ISO DIN Head Unit Provision
• Painted Matte Black to Match Factory
A) Radio Housing • B) Snap-In Pocket • C) ISO Brackets • D) ISO Trim Plate • E) Double DIN Brackets
• F) Double DIN Trim Plate • G) (4) Panel Clips
KIT COMPONENTS
99-7506
APPLICATIONS
2006-2008
C
B
E
D
F
F
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-7903 - Mazda harness 2001-up
Antenna Adapter:
• Not required
Mazda MX-5 Miata
A

Metra Electronics 99-7506 Specifications

General

Brand	Metra Electronics
Model	99-7506
Category	Automobile Accessories
Language	English

Summary

Dash Disassembly

Disconnect Battery

Disconnect the negative battery terminal to prevent accidental short circuits during installation.

Remove Radio/Climate Control Panel

Steps to remove screws, pull out the panel, disconnect plugs, and detach the climate control unit.

Kit Assembly: DIN Head Unit Provision

Install Aftermarket Head Unit

Sliding the aftermarket head unit into the cage and securing it.

Kit Assembly: ISO DIN Head Unit Provision

Install Head Unit and Trim Plate

Kit Assembly: Double DIN Head Unit Provision

Install Double DIN Unit and Trim Plate

Kit Assembly: Stacked ISO DIN Head Unit Provision

Prepare Housing and Install Brackets

Install Stacked ISO Units and Trim Plate

Final Assembly and Wiring

Make Wiring Connections

Locate factory harness, make connections using EIA color code, and tape unused wires.

Test and Reassemble

Reconnect battery, test the unit, and reassemble dash components in reverse order.