Turn over the 99-7519B housing,
take the climate control and screws
removed from the factory panel and
attach the climate control to the kit
housing using the factory screws.
(Figure A)
1
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down.
(Figure C)
3
A
C
D
Slide the pocket into the bottom
section of the kit housing.
(Figure B)
2
Slide the aftermarket head unit into
the cage and secure.
(Figure D)
4
DIN HEAD UNIT PROVISION
B
99-7519B
KIT ASSEMBLY
5
To Next Page
Loading...
