Metra. The World’s Best Kits.
®
MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 12/12/19 INSTJP-1014
INSTALLATION INSTRUCTIONS
JP-1014
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• Driver and passenger specific dash replacement sealed speaker pods
to install 6” to 6.75” speaker
• Mounting positions for Chrysler three hole mount used by specific
speaker manufacturers such as Alpine
• Sealed enclosure with a hole for the factory wiring grommet
• Includes necessary speaker harness adapter
KIT COMPONENTS
• A) Speaker pods (L&R) • B) Speaker harness adapter (2)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 8mm, 10mm, socket wrench
TABLE OF CONTENTS
Dash Disassembly ..............................................2-6
Kit Assembly ..........................................................7
Jeep Wrangler (JL) 2018, Wrangler 2019-Up
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
A B
To Next Page
Need help?
General
