5
www.portableappliancetesters.com.au/support
Select it and then you should see the ZebraPRN as your default
printer. This will now be the default printer when you press the
print button after a completed test.
The Metrel Tester also needs to be setup to the correct printer, this should be set when purchased but if the unit is
wiped or deleted, you may need to set this up again.
On the Delta, use the UP / DOWN keys until the menu shows SETUP.
Press Test and then scroll down to Communication and press the Test button again
Scroll through the Printer options until Zebra BT is selected
Scroll down to PRN Name and press Test, the unit should scan and find ZebraPRN
To Next Page
Loading...
