METREL DELTAPAT 3309 User Manual

METREL
DELTAPAT 3309
QUICK REFERENCE GUIDE
0800 111 780
www.portableappliancetesters.co.nz
Class I
1. Connect the BLACK return lead (using
clip or probe) to an exposed metal part on
the appliance, then the other end into the
socked laballed ‘S/EB’ on top right of the
DeltaPAT.
2. Connect the power supply lead from the
appliance into the front of the DeltaPAT
tester and turn the appliance on.
3. On the DeltaPAT Main Menu, select SIMPLE
TEST and press TEST.
4. Using the arrow keys scroll to Class I.
5. Press the TEST button to start the test.
6. The DeltaPAT will cycle through the ‘Earth
Bond’ and ‘Insulation Resistance Test’.
7. A PASS or FAIL will be indicated on the
screen once the test has been completed.
8. Press the ESC to start a new test.
Class II
1. Ensure the appliance is turned ON.
2. If you’re using an Earth Cloak shroud the
device. Connect the BLACK return lead
(using clip or probe) to a metal part or
cloak if used. The other end will be placed
into the socket labelled ‘S/EB’ on the top
right of the DeltaPAT.
3. Connect the power supply lead from the
appliance into the front of the DeltaPAT
tester and turn the appliance on.
4. On the DeltaPAT Main Menu select SIMPLE
TEST and press TEST.
5. Using the arrow keys scroll to Class II test.
6. Press the TEST button to start the test.
7. The DeltaPAT will cycle through the
‘Insulation Resistance Test’.
8. A PASS or FAIL will be indicated on the
screen once the test has been completed.
9. Press the ESC to start a new test.

METREL DELTAPAT 3309 Specifications

General

Brand	METREL
Model	DELTAPAT 3309
Category	Measuring Instruments
Language	English

Summary

Class I Appliance Testing

Class I Test Procedure

Steps to perform Class I appliance testing, including connecting leads and running tests.

Class II Appliance Testing

Class II Test Procedure

Steps for Class II appliance testing, covering connections, appliance power, and test execution.

Extension Leads Testing

Extension Leads Test Procedure

Procedure for testing extension leads, involving lead connection and test execution.

RCD Testing

RCD Test Procedure

Steps to perform RCD testing, including mains connection, RCD connection, and test setup.

Leakage Current Testing

Leakage Current Test Procedure

Procedure for testing leakage current on appliances and RCDs, ensuring correct mains connection.