Need help?Do you have a question about the METREL MI 3103 and is the answer not in the manual?
General| Type | Multifunction Installation Tester |
|---|---|
| Insulation Resistance | Yes |
| Continuity | Yes |
| RCD testing | Yes |
| RCD Test Current | 10 mA, 30 mA, 100 mA, 300 mA, 500 mA |
| Loop impedance | Yes |
| Line impedance | Yes |
| Phase sequence | Yes |
| Earth resistance | Yes |
| Illumination | Yes |
| Harmonics | Yes |
| Data transfer | USB |
| Memory | Yes |
| Display | LCD |
| Power Supply | 6 x 1.5 V AA batteries |
| Safety | EN 61557 |
| Measurement Functions | Insulation resistance, Continuity, RCD testing, Loop impedance, Line impedance, Earth resistance |
Describes the instrument's capabilities and main functions.
Lists the industry standards the instrument complies with for operation and safety.
Details the physical housing of the test instrument.
Describes the layout of the LCD, rotary switch, and keys on the front panel.
Explains the instrument's connectors and critical safety voltage limits.
Illustrates and describes components and labels found on the instrument's bottom.
Lists the standard and optional accessories supplied with the instrument.
Provides crucial safety precautions to prevent injury and equipment damage during use.
Explains various LCD messages and symbols indicating operational status or errors.
Details the procedure, connection, and safety for insulation resistance testing.
Explains how to perform continuity tests using a 200mA test current.
Describes continuity testing for inductive loads using a low test current.
Instructions on how to compensate test leads for accurate resistance readings.
Explains how to perform voltage measurements and associated safety notes.
Advises on the importance of regular inspection for safety and reliability.
Details the process for replacing the instrument's batteries and safety precautions.
Explains how to replace the instrument's fuse and the correct fuse type.
Provides instructions and precautions for cleaning the instrument's surface.
Information on obtaining service and handling repairs under or out of warranty.
Provides detailed specifications for Insulation resistance and R±200mA measurements.
Details specifications for Rcon continuity and Voltage U measurements.
Covers power supply, dimensions, operating/storage conditions, and fuses.
To Next Page