Need help?Do you have a question about the METREL Instaltest 61557 MI 2087 and is the answer not in the manual?
Identification and function of keys, display, and rotary switch on the instrument's front panel.
Procedure for measuring insulation resistance, including setup and execution steps.
General| Continuity testing | Yes |
|---|---|
| Insulation resistance | Yes |
| Loop impedance | Yes |
| Line impedance | Yes |
| RCD testing | Yes |
| Voltage | Yes |
| Frequency | Yes |
| Phase sequence | Yes |
| Earth resistance | Yes |
| Illuminance | No |
| Harmonics | No |
| Memory | Yes |
| PC communication | Yes |
| Power Supply | 6 x 1.5 V AA batteries |
| Measurement Category | CAT IV 300V, CAT III 600V |
| Frequency Range | 45Hz to 65Hz |
| Display | LCD |
| Safety Standards | IEC 61557 |
To Next Page