EasyManua.ls Logo

METREL DELTAPAT Series User Manual

METREL DELTAPAT Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.portableappliancetesters.com.au/support
Question and Answer IconNeed help?

Do you have a question about the METREL DELTAPAT Series and is the answer not in the manual?

METREL DELTAPAT Series Specifications

General IconGeneral
SeriesDeltapat
ManufacturerMetrel
Continuity TestYes
Insulation Resistance TestYes
Earth Leakage TestYes
Touch Leakage TestYes
Polarity TestYes
RCD TestYes
Power TestYes
DisplayLCD
Data LoggingYes
PC CommunicationYes
Compliance StandardsIEC/EN 61557

Summary

01. What is Inside the Deltapat Complete Kit

Zebra 2824+ Printer

Details the Zebra 2824+ printer included in the Metrel Deltapat Complete Kit.

Metrel Deltapat MI3309 BT

Identifies the Metrel Deltapat MI3309 BT appliance tester as a key component of the kit.

Zebra Battery Pack

Describes the Zebra battery pack accessory provided with the Metrel Deltapat Complete Kit.

Leads & Probes Kit

Lists the leads and probes kit that is part of the Metrel Deltapat Complete Kit.

2 X IEC Leads

Specifies the inclusion of two IEC leads within the Metrel Deltapat Complete Kit.

02. How to Download and Set Up Software

Activate the Software

Guides on activating the Patlink software using a supplied code for full functionality.

Select your Printer

Instructions on how to select the correct printer within the Patlink software settings.

03. Activating the Software

Device Activation

Details the process for entering the activation code to enable full software features.

04. Set-up the Printer

Select BT Printer

Explains how to set up the Bluetooth printer connection within the software.

05. Configuring the Printer on the Metrel Tester

Setup

Guides on accessing the SETUP menu on the Metrel Delta tester.

Communication

Details how to navigate to the Communication settings on the Metrel Delta tester.

PRN Name

Instructions on setting the PRN Name for printer configuration on the Metrel Delta tester.

06. Entering Data and Performing a Test

Appliance ID

Explains the importance and entry of the Appliance ID for test records.

Appliance Name

Describes how to enter the Appliance Name for accurate test documentation.

Retest Period (Months)

Details on entering the retest period for appliances to track future inspections.

Location

Guidance on recording the storage location of appliances for organized reporting.

07. How to Charge the Battery Pack

08. How to Operate the Printer from Mains Power

09. How to Enter the User to Appear on the Tag

10. How to Download Data from the Tester to the PC

COMMON TROUBLE SHOOTING TIPS

Android Device Won't See the Deltapat

Troubleshooting steps for when the Android device fails to detect the Deltapat tester.

Unit Does Not Proceed Through Each Test Automatically

Resolving issues where the unit fails to automatically advance through tests.

Unit Fails Earth Bond Test

Guidance on troubleshooting the Earth Bond Test failure, checking connections.

LN Resistance High or Low Appears on Screen

Addressing the 'LN Resistance High or Low' error message on the tester screen.

Android Software Asking for Pairing Passcode

Information on the default pairing passcode for Android software connection.

Patlink on PC Asking for Password During Install

Troubleshooting password prompts during Patlink PC program installation.

More Information & Useful Resources

Related product manuals