METREL T10K User Manual

Line Tracer
20
Using Current Clamp for Current-Signal Injection
CONDUCTIVE LOOP
Re ceiv er R1 0K
switched in
inductive mode
Transmitter T10K
is automatically
in generator mode
A 1019
A 1068
Fig. 18. Tracing conductive loops by using current clamp
Instead of a direct current-signal injection, clamp can be used for this purpose and
conductive loop can be traced afterwards.

METREL T10K Specifications

General

Brand	METREL
Model	T10K
Category	GPS
Language	English