Metrix HI 803 - CHAPTER 2 - SPECIFICATIONS (Continued); Transducer Sensitivity Range

Doc# 0296-0018 • REV R (July 2017) Page 12 of 61
Transducer Sensivity Range
• Accelerometers:
ICP 5 mV/g - 200 mV/g
Charge 5 PC/g - 200 PC/g
• Velocity 5 mV/I.P.S. - 1 Volt/I.P.S.
• Displacement 30 mV/Mil - 300 mV/Mil
Reference Accelerometer Output
• Sensivity = 50 mV/g +- .15 dB @ 100 Hz
• Output Impedance = 100 Ohms nominal
DI-103 & DI-103A
Triaxial Mounted Specicaons
Sensivity +- 10% @ 100 Hz 10 mV/g
Frequency Range: Channel: A. +- 1 dB .2 - 2,000 Hz
Channel: B. +- 1 dB .2 - 2,000 Hz
Channel: C. +- 1 dB .2 - 5,000 Hz
Channel: C. +- 3 dB 1 - 10,000 Hz
Power • Baery Powered
• 115 VAC, 50/60 Hz charger (The instrument can be operated during charging)
• HI-803-220 VAC provides 220 VAC, 50 Hz charging capability
Printer • Thermal Type Printer
• Character Format 5 x 7 dot matrix
• Prinng Speed (Line/Sec) 0.9
• Paper Width 2.3”
Physical Dimensions
• Size - 11” (279.4 mm) Long x 7” (177.8 mm) Wide x 10” (254 mm) High
• Weight - 22.7 lbs (10.297 Kgs) 100 to 2700 F (-120 to +1320 C)
Environmental Specicaons
10° to 270° F (-120° to +132° C)