Metronic DV3 - Connection with phono cable; Connection of Infra Red Extension Cable; Connection of an audio-digital receiver; Connection of the coaxial digital output

Connection with phono cable
Ö Connect the phono connectors of the audio cable to the “AUDIO
R” and “AUDIO L” sockets of the receiver if you want to connect
a stereo system.
Caution!
Strictly follow the instructions for connecting the audio cable given
in the operating manual of your stereo system.
L
The phono cable is not included in the product contents.
Connection of Infra Red Extension Cable
If you want the receiver to be hidden from view, for example in a
cupboard, connect the IR extension cable. You must ensure that
there is a clear line of sight between your remote control and the IR
extension sensor.
Connection of an audio-digital receiver
If you want to use 5-channel audio transmission (Dolby digital
sound/AC3), you must connect your audio-digital receiver to the
coaxial output of the receiver.
Caution!
Please follow strictly the information regarding connection in the
operating manual of your audio-digital receiver.
L
Your TV set need not be switched on for radio reception.
Connection of the coaxial digital output
Ö Insert the coaxial cable in the “SPDIF” (=COAXIAL)socket of the
receiver.
Ö Connect the coaxial cable to the audio-digital receiver.
22